|Corvettes For Sale - Sell Your Corvette
Your Internet Destination for Buying & Selling Corvettes
|Return to last ad viewed |
2000 Corvette Convertible Classified Ad Details:
|Year/Model: ||2000 Convertible Corvette for sale|
|Date Posted: ||04/04/2017
|VIN: ||1G1YY32GXY5128891 Free Carfax Record Check|
|Comments:||This car was dynoed four years ago with 657 HP. I haven't changed anything since then except tires and oil. The car runs like a dream. All buttons work. Interior is perfect. The exterior has a one inch scratch on the lower passenger door but not deep. The top doesn't leak at all. There are a couple of rubbed spots on the top from folding it to store. Tinted windows.
The custom motor has a little over 2500 miles on it. This is what it consists of...
1 350c.i. aluminum block by Thompson Motorsports. Forged internals and blueprinted. 5.7 generation IV.
2 Forged pistons 3.902".
3 TMS Moly rings.
4 GM connecting rods.
5 GM crank shaft polished and balanced.
6 Clevite main and rod bearings.
7 Durabond cam bearings.
8 GM LS2 243 heads by Advanced Induction. 243 F1 Package.
9 Manley 221436 Nextek .660" shot peened and fully polished dual spring kit.
221436-16 dual springs.
23623-16 titanium retainers.
42334-16 hardened spring locators.
13098-16 precision machined locks.
Steel jacketed Viton Seals.
10 11.4:1 compression.
11 Complete CNC port and polish.
12 F1 valve job.
13 232cc cathedral port (LS2 and Strokers only)
14 PCD milled and 69cc chamber volume.
15 Intake and exhaust flange milled.
16 Bronze guide liners.
17 Custom Advanced Induction Cam. 230/236 - .630/.630 on a 113 degree LSA.
18 Breathless Vortex Induction.
19 FAST 102mm intake.
20 Fast Pro fuel rail kit.
21 160 degree thermostat.
22 42lb custom injectors.
23 96mm LS2 electronic throttle body. (Ported and polished 90mm base)
24 Smooth Flow 1 3/4" headers. Long tube. Ceramic coated in and out. 3" downtubes.
25 Random Tech 3" High Flow Racing Cats.
26 ECM/ECV tune/flash Performance Tune by Trifecta.
27 Z-6 LS7 85mm MAF sensor.
28 MSD 8.8 plug wires.
29 4" silicone tube to TB.
30 Hardened push rods.
31 Melling LS6 Hi-Volume ported oil pump. O'ring type.
32 Rear O2 sensor delete.
33 AIR delete.
34 CAG's disabled.
35 Torque mgt. disabled.
36 Powerbond 25% underdrive pulley.
37 Crank case evacuation kit.
38 Star Spec Stage 3 Clutch.
39 ARP head bolts.
40 Heavy duty roller timing chain.
41 New cam and crank gears.
42 Custom shortened 6 rib A/C and drive belts.
43 Re-Usable crank bolt.
44 GM Hi Torque Heavy Duty Starter.
As you can see, no short cuts were taken. Best of everything. And it sure paid off.
No disappointments with this one.
|Price:||$17,000.00 OBO |
|Location: ||Saltillo, MS Where is this? |
| || |
Contact the Seller: 2000 Corvette for Sale
Copyright © 1996-2017 VetteFinders, Inc. All rights reserved.
VetteFinders, Inc. is not associated with General Motors Corporation.
The Original Corvette Classifieds Website Since 1996!