VETTEFINDERS.COM 1979 PROJECT CORVETTE |
| Part corvette.17 |
Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Part 7 | Part 8 | Part 9 | Part 10 | Part 11 | Part 12 | Part 13 | Part 14 | Part 15 | Part 16 | Part 17 | Part 18 | Part 19 | Part 20 | Part 21 | Part 22 | Part 23 | Part 24 | Part 25 | Your Comments | about us |
May 24, 2003
With the new suspension parts from Vansteel, and shocks from Koni, we now have a rolling chassis!! Don't those shocks look great? Remember how the originals looked?
We installed new brake lines, new fuel lines and cleaned up the brake proportioning valve. Then we installed the original front springs after painting them with black epoxy. Be very careful when installing the springs. If the jack or spring compressor (depending on your method) slips, you could lose something much worse than an eye. 
We are heading down the home stretch now with the chassis. We'll be installing a new fiberglass rear spring (donated by Vansteel) next time and cleaning up the fuel tank. 
|
| Part corvette.17 |
Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Part 7 | Part 8 | Part 9 | Part 10 | Part 11 | Part 12 | Part 13 | Part 14 | Part 15 | Part 16 | Part 17 | Part 18 | Part 19 | Part 20 | Part 21 | Part 22 | Part 23 | Part 24 | Part 25 | Your Comments | about us |
Project '79 Sponsors & Contributors
|
 |
 |
 |
| KONI NA | Van Steel | Revivation | Caledonia |